NoJusticeNoPeace
NoJusticeNoPeace's JournalThom Hartman says message boards have paid trolls who are very active
and their job is to convince people Hillary is bad news.
He says on his board and radio show they are able to "out" them from time to time, but make NO mistake, they are out and about.
that is all...
The anti Hillary people are making this place unbearable.
And this is coming from someone who has been on board with Bernie since DAY ONE.
I point out in a thread started by someone else who is alleging a conflict of interest of Hillary and Corning Inc., that all politicians act in such a way that a big business constituent AND rank and file constituents are benefited by their votes. Like Bernie did supporting the F.35.
Wasn't Corning Inc an employer in her state at the time Hillary allegedly assisted them in advancing their business?
Let's take a look and see what we see
Aircraft Operations - Corning Hangar
348 Sing Sing Rd.
Horseheads, New York 14845, United States
Phone: +1 607 796 0624
Fax: +1 607 796 0147
Corning Enterprises
One West Market Street - 6th Floor
Corning, New York 14831, United States
Phone: +1 607 974 4488
Fax: +1 607 974 4050
Corning Environmental Technologies Manufacturing Complex, Diesel Location
890 Addison Road
Painted Post, New York 14870, United States
Phone: +1 607 974 1255
Fax: +1 607 974 1247
Corning Environmental Technologies Manufacturing Complex, Erwin Location
792 Addison Rd.
EJ-01-01
Painted Post, New York 14870, United States
Phone: +1 607 974 1255
Fax: +1 607 974 1247
Corning Incorporated - Canton Plant
334 County Route 16
Canton, New York 13617, United States
Phone: +1 315 379 3200
Fax: +1 315 379 3310
Return to top
Corning Incorporated - Center for Fiber-Optic Testing
103 Canada Road
Painted Post, New York 14870, United States
Phone: +1 607 974 3801
Fax: +1 607 974 3761
Corning Incorporated - Life Sciences
275 River St.
Oneonta, New York 13820, United States
Phone: +1 607 433 3100
Fax: +1 607 433 3161
Corning Incorporated - Manufacturing Technology + Engineering
Decker Bldg.
Corning, New York 14831, United States
Phone: +1 607 974 9000
Fax: +1 607 974 6730
Corning Incorporated - New York City Office
767 Fifth Avenue
23rd Floor
New York, New York 10153, United States
Phone: +1 646 521 9600
Fax: +1 646 521 9641
Corning Incorporated - Refractories Plant
Front St.
MP-RP-01-1
Corning, New York 14831, United States
Phone: +1 607 974 7763
Fax: +1 607 974 7869
Return to top
Corning Incorporated - Shared Services Excellence Center
Houghton Park, A-Building
Corning, New York 14831, United States
Phone: +1 607 248 1200
Fax: NA
Corning Incorporated - State and Local Government Relations
MP-BH-06
Corning, New York 14831, United States
Phone: +1 607 974 7818
Fax: +1 607 974 4050
Corning Incorporated Foundation
MP-BH-07
Corning, New York 14831, United States
Phone: +1 607 974 8722
Fax: +1 607 974 4756
Corning Innovation Support Center - Business Services Division
271 County Rt. 64
Big Flats, New York 14814, United States
Phone: +1 607 974 0206
Fax: +1 607 974 0256
Corning International
One Riverfront Plaza
Corning, New York 14831, United States
Phone: +1 607 974 9000
Fax: +1 607 974 5927
Return to top
Corning Tropel
60 O'Connor Road
Fairport, New York 14450, United States
Phone: +1 585 388 3500
Fax: +1 585 377 1966
Corporate Headquarters
One Riverfront Plaza
Corning, New York 14831, United States
Phone: +1 607 974 9000
Fax: NA
IDM (Integrated Die Manufacturing)
905 Addison Road
Painted Post, New York 14870, United States
Phone: +1 607 974 3420
Fax: +1 607 974 1521
Sullivan Park R&D Center
NA
Corning, New York 14831, United States
Phone: +1 607 974 9000
Fax: +1 607 974 34
Is this the same company Hillary is alleged to have a "conflict of interest "with?
I am asking, I am not absolutely certain. You see, I dont WANT to spend my DAY on a DEMOCRATIC message board DEFENDING the top DEMOCRATIC CANDIDATE, I am used to doing that on RIGHTWING boards, but I see I have to do that here as well.
Anyway, all I pointed out on another thread was that ALL politicians are guilty of helping corps who do business in their state so they can ALSO help their constituents with jobs.
This is why the big defense contractors and others make sure they have operations in as many states as possible, they get massive political support as a result.
I didn't want to spend my time doing this, for example in doing so we bring up the Bernie and F-35 thing, something I didnt know about until last week. I dont need to know about that, he could support a thousand of those and I will still support him because of all the obvious reasons why he OR Hillary are VASTLY better than any con.
I dont know what the motives are with the endless attacks of Hillary, I wish I did. I just know that as a Democratic Socialist, as someone who is FAR to the left of probably over 95% of the people here, I am frightened to death of a teaparty influenced WH, Senate and House.
I firmly believe it could be the end of the country and will put death by climate change on overdrive.
It is literally life and death for all of us, but in the NEAR term it is life and death for women and minorities and gay folks.
As to the "Hillary vs Bernie" posters here.
We have a few categories it seems
From category A: Daily assault of Hillary, will use rightwing sites or sources, will use any source if it attacks Hillary or the Clinton's
From category B: Assaults of Bernie about how he cant win, he looks funny, he isnt taken seriously by most people
Then there is category C: I believe I am in this category. I support the Democratic Party winning in 2016, NOT because I think any politician is "all that", including Hillary or for that matter Bernie. If I had to choose, and I do, I choose Bernie.
But I dont do this at the detriment of the other participant in OUR party, you see this is DEMOCRATIC UNDERGROUND, and while I am no big fan of either of our political parties, I am far more comfortable with Democrats in power than those other bastards.
Why cant the pro Bernie, anti Hillary people go after the issues the way Bernie does, instead of go after Hillary, as Bernie rarely does.
Same goes for the other way around.
class dismissed and peace out 
Let's try something on TPP, something a little different.
TPP = bad
No doubt..........................
America will lose jobs to outsourcing every year with or without TPP, with TPP maybe less, I dont know, but forget that. Pretend there is no TPP on the table.
WHAT do WE do?
Are you willing to DEMAND your reps institute tariffs while raising taxes on the wealthy and corps so we can use that money to invest in mfg jobs here?
If not, What do WE do?
Teaparty and republican party WANT death from crumbling infrastructure.
And the more deaths caused by avoidable accidents, the happier they are and the more likely, I hope, people will wake up to what is going on.
If the reason that train was speeding was because there were no funds to put a "governor" on it, which acts to prevent the operator from speeding, then it was caused by lack of proper infrastructure.
I dont want people to die, but they are going to die because of the teaparty and republican party.
This we know.
Will the rest of America figure out how to avoid death in the future?
PEW says Christians are declining in America
http://www.pewforum.org/2015/05/12/americas-changing-religious-landscape/
I dont know until I read it all if people who realize god is a fairy tale, if that number is growing or not.
I call it a fairy tale and as soon as I do many believers will consider me being rude.
Oh well...i have been called worse.
I have said that evolution will eventually eliminate beliefs like this as well as guns, but not in our lifetimes of course.
And now for something completely different
Selma - The movie
Make sure everybody you know sees it, especially the white folks who are so sure racism is dead and gone.
Then make them watch
Telling white people they have to stop being you know what, doesnt work, even the liberal ones react you know how.
Maybe one day they will get it.
Maybe these movies will help.
Religion should me mocked, problem is when you pick out only one and
leave the rest alone.
Profile Information
Member since: Tue Nov 25, 2014, 09:32 AMNumber of posts: 5,018
