Welcome to DU! The truly grassroots left-of-center political community where regular people, not algorithms, drive the discussions and set the standards. Join the community: Create a free account Support DU (and get rid of ads!): Become a Star Member Latest Breaking News General Discussion The DU Lounge All Forums Issue Forums Culture Forums Alliance Forums Region Forums Support Forums Help & Search
 

Ghost Dog

(16,881 posts)
15. Airbus has a nicely-organised transport system:
Sat Jan 12, 2013, 07:48 AM
Jan 2013
... The A380’s size means its fuselage and wing sections are shipped via a surface transportation network that includes specially-commissioned roll-on roll-off ships to carry these sections from production sites in France, Germany, Spain and the United Kingdom to the French city of Bordeaux. From there, sections are transported by barge along the Garonne River to the Toulouse final assembly line.

As for other Airbus aircraft programmes, production of the A380 takes place in different sites across Europe. Each site produces completely equipped sections, which are transported to final assembly .

Most A380 sections are transported to Toulouse by sea, river and road. A number of smaller components, such as the vertical fin produced in Stade or the nose section produced in Meaulte, France, are carried in Airbus’ Beluga fleet... - http://www.airbus.com/company/aircraft-manufacture/how-is-an-aircraft-built/transport-of-major-aircraft-sections/


[center] [/center]

... Starting in Hamburg-Finkenwerder on the River Elbe, the ship loads the front and rear sections of the fuselage, from where they are shipped to the United Kingdom.[4] The wings, which are manufactured at Filton in Bristol and Broughton, Flintshire in North Wales, are transported by barge to Mostyn docks, where the ship adds them to its cargo. In Saint-Nazaire in western France, the ship trades the fuselage sections from Hamburg for larger, assembled sections, some of which include the nose. The ship unloads in Bordeaux. Afterwards, the ship picks up the belly and tail sections by Construcciones Aeronáuticas SA in Cádiz in southern Spain, and delivers them to Bordeaux. From there, the A380 parts are transported by barge to Langon, and by the oversize road convoys of the Itinéraire à Grand Gabarit from there to the assembly hall in Toulouse.[7]

After assembly, the aircraft are flown to Hamburg Finkenwerder Airport (XFW) to be furnished and painted... - http://en.wikipedia.org/wiki/Ville_de_Bordeaux


[center]
http://en.wikipedia.org/wiki/Itin%C3%A9raire_%C3%A0_Grand_Gabarit [/center]
I dont know much about planes, but darkangel218 Jan 2013 #1
darkangel218 Diclotican Jan 2013 #3
Um.i.didnt know that :) darkangel218 Jan 2013 #5
darkangel218 Diclotican Jan 2013 #7
The reason for the lighter material is they can flight farther on less fuel davidpdx Jan 2013 #4
This message was self-deleted by its author darkangel218 Jan 2013 #6
davidpdx Diclotican Jan 2013 #8
If you are talking about Airbus, it is basically a European company davidpdx Jan 2013 #11
davidpdx Diclotican Jan 2013 #14
Airbus has a nicely-organised transport system: Ghost Dog Jan 2013 #15
carbon fiber.. sendero Jan 2013 #16
Perhaps due to scab labor in looney SC? n/t cosmicone Jan 2013 #2
+1 Populist_Prole Jan 2013 #9
Airbus buys over 40% of their parts in the USA DFW Jan 2013 #10
If it's true, it has nothing with touting the use of American parts davidpdx Jan 2013 #12
i flew on from Seattle to Tokyo... BREMPRO Jan 2013 #13
Locking Kaleva Jan 2013 #17
Latest Discussions»Latest Breaking News»Why Boeing's 787, the Dre...»Reply #15