EPA Completes Framework for Greenhouse Gas Permitting Programs …

[OKIsItJustMe]

http://yosemite.epa.gov/opa/admpress.nsf/d0cf6618525a9efb85257359003fb69d/cad212db554919ec8525780200570c1c!OpenDocument

EPA Completes Framework for Greenhouse Gas Permitting Programs / EPA and states have worked closely to ensure a smooth transition

Release date: 12/23/2010

Contact Information: Cathy Milbourn, [e-mail], 202-564-7849, 202-564-4355

WASHINGTON – U.S. Environmental Protection Agency (EPA) is issuing the final series of actions that will ensure that the largest industrial facilities can get Clean Air Act permits that cover greenhouse gas (GHG) emissions beginning in January 2011. These actions are part of EPA’s common sense approach to GHG permitting outlined in the spring 2010 tailoring rule.

The first set of actions will give EPA authority to permit GHGs in seven states (Ariz., Ark., Fla., Idaho, Kan., Ore., and Wyo.) until the state or local agencies can revise their permitting regulations to cover these emissions. EPA is taking additional steps to disapprove part of Texas' Clean Air Act permitting program and the agency will also issue GHG permits to facilities in the state. These actions will ensure that large industrial facilities will be able to receive permits for greenhouse gas emissions regardless of where they are located.

In the second set of actions, EPA has issued final rules that will ensure that there are no federal laws in place that require any state to issue a permit for GHG emissions below levels outlined in the tailoring rule.

EPA has worked closely with the states to ensure that the transition to permitting for GHGs is smooth. States are best suited to issue permits to sources of GHG emissions and have experience working with industrial facilities. EPA will continue to work with states to help develop, submit, and obtain approval of the necessary revisions to enable the affected states to issue air permits to GHG-emitting sources.

Beginning in January 2011, industries that are large emitters of GHGs, and are planning to build new facilities or make major modifications to existing ones, must obtain air permits and implement energy efficiency measures or, where available, cost-effective technology to reduce their GHGs emissions. This includes the nation's largest GHG emitters, such as power plants, refineries and cement production facilities. Emissions from small sources, such as farms and restaurants are not covered by these GHG permitting requirements.

More information: http://www.epa.gov/nsr

http://yosemite.epa.gov/opa/admpress.nsf/d0cf6618525a9efb85257359003fb69d/d2f038e9daed78de8525780200568bec!OpenDocument

EPA to Set Modest Pace for Greenhouse Gas Standards / Agency stresses flexibility and public input in developing cost-effective and protective GHG standards for largest emitters

Release date: 12/23/2010

Contact Information: Cathy Milbourn, [e-mail], 202-564-7849, 202-564-4355

WASHINGTON – The U.S. Environmental Protection Agency issued its plan for establishing greenhouse gas (GHG) pollution standards under the Clean Air Act in 2011. The agency looked at a number of sectors and is moving forward on GHG standards for fossil fuel power plants and petroleum refineries—two of the largest industrial sources, representing nearly 40 percent of the GHG pollution in the United States. The schedule issued in today’s agreements provides a clear path forward for these sectors and is part of EPA’s common-sense approach to addressing GHGs from the largest industrial pollution sources.

“We are following through on our commitment to proceed in a measured and careful way to reduce GHG pollution that threatens the health and welfare of Americans, and contributes to climate change,” Administrator Lisa Jackson said. “These standards will help American companies attract private investment to the clean energy upgrades that make our companies more competitive and create good jobs here at home.”

Several states, local governments and environmental organizations sued EPA over the agency’s failure to update the pollution standards for fossil fuel power plants and petroleum refineries, two of the largest source categories of GHG pollution in the United States. Under today’s agreement, EPA will propose standards for power plants in July 2011 and for refineries in December 2011 and will issue final standards in May 2012 and November 2012, respectively.

This schedule will allow the agency to host listening sessions with the business community, states and other stakeholders in early 2011, well before the rulemaking process begins, as well as to solicit additional feedback during the routine notice and comment period. Together this feedback will lead to smart, cost-effective and protective standards that reflect the latest and best information.

The Clean Air Act requires EPA to set industry-specific standards for new sources that emit significant quantities of harmful pollutants. These standards, called New Source Performance Standards (NSPS), set the level of pollution new facilities may emit and address air pollution from existing facilities. The Act allows flexible and innovative approaches that take into account cost, health and environmental impacts, and energy requirements. EPA must also periodically update these standards to reflect improvements in control technologies.

Earlier this year, EPA issued a common-sense approach to GHG permitting for the largest industrial sources. This approach, the GHG permitting guidelines issued in November, and these standards will give power plants and refineries a clear and sensible path for addressing GHG pollution.

EPA will accept public comment on these two agreements for 30 days following publication of notice in the Federal Register.

More information: http://www.epa.gov/airquality/ghgsettlement.html

“EPA is taking additional steps to disapprove part of Texas' Clean Air Act permitting program…”