Welcome to DU! The truly grassroots left-of-center political community where regular people, not algorithms, drive the discussions and set the standards. Join the community: Create a free account Support DU (and get rid of ads!): Become a Star Member Latest Breaking News Editorials & Other Articles General Discussion The DU Lounge All Forums Issue Forums Culture Forums Alliance Forums Region Forums Support Forums Help & Search

Nye Bevan

(25,406 posts)
4. Cleanup instructions if you break a CFL bulb (careful with that mercury vapor):
Sat Dec 28, 2013, 03:19 PM
Dec 2013

Before Cleanup

* Have people and pets leave the room, and avoid the breakage area on the way out.
* Open a window or door to the outdoors and leave the room for 5-10 minutes.
* Shut off the central forced-air heating/air conditioning (H&AC) system, if you have one.
* Collect materials you will need to clean up the broken bulb:
o Stiff paper or cardboard
o Sticky tape (e.g., duct tape)
o Damp paper towels or disposable wet wipes (for hard surfaces)
o Glass jar with a metal lid (such as a canning jar) or a sealable plastic bag(s)

Cleanup Steps for Hard Surfaces

* Carefully scoop up glass fragments and powder using stiff paper or cardboard and place debris and paper/cardboard in a glass jar with a metal lid. If a glass jar is not available, use a sealable plastic bag. (NOTE: Since a plastic bag will not prevent the mercury vapor from escaping, remove the plastic bag(s) from the home after cleanup.)
* Use sticky tape, such as duct tape, to pick up any remaining small glass fragments and powder. Place the used tape in the glass jar or plastic bag.
* Wipe the area clean with damp paper towels or disposable wet wipes. Place the towels in the glass jar or plastic bag.
* Vacuuming of hard surfaces during cleanup is not recommended unless broken glass remains after all other cleanup steps have been taken. If vacuuming is needed to ensure removal of all broken glass, keep the following tips in mind:
o Keep a window or door to the outdoors open;
o Vacuum the area where the bulb was broken using the vacuum hose, if available; and
o Remove the vacuum bag (or empty and wipe the canister) and seal the bag/vacuum debris, and any materials used to clean the vacuum, in a plastic bag.
* Promptly place all bulb debris and cleanup materials, including vacuum cleaner bags, outdoors in a trash container or protected area until materials can be disposed of properly.
o Check with your local or state government about disposal requirements in your area. Some states and communities require fluorescent bulbs (broken or unbroken) be taken to a local recycling center.
* Wash your hands with soap and water after disposing of the jars or plastic bags containing bulb debris and cleanup materials.
* Continue to air out the room where the bulb was broken and leave the H&AC system shut off, as practical, for several hours.

Cleanup Steps for Carpeting or Rugs

* Carefully scoop up glass fragments and powder using stiff paper or cardboard and place debris and paper/cardboard in a glass jar with a metal lid. If a glass jar is not available, use a sealable plastic bag. (NOTE: Since a plastic bag will not prevent the mercury vapor from escaping, remove the plastic bag(s) from the home after cleanup.)
* Use sticky tape, such as duct tape, to pick up any remaining small glass fragments and powder. Place the used tape in the glass jar or plastic bag.
* Vacuuming of carpeting or rugs during cleanup is not recommended unless broken glass remains after all other cleanup steps have been taken. If vacuuming is needed to ensure removal of all broken glass, keep the following tips in mind:
o Keep a window or door to the outdoors open;
o Vacuum the area where the bulb was broken using the vacuum hose, if available, and
o Remove the vacuum bag (or empty and wipe the canister) and seal the bag/vacuum debris, and any materials used to clean the vacuum, in a plastic bag.
* Promptly place all bulb debris and cleanup materials, including vacuum cleaner bags, outdoors in a trash container or protected area until materials can be disposed of properly.
o Check with your local or state government about disposal requirements in your area. Some states and communities require fluorescent bulbs (broken or unbroken) be taken to a local recycling center.
* Wash your hands with soap and water after disposing of the jars or plastic bags containing bulb debris and cleanup materials.
* Continue to air out the room where the bulb was broken and leave the H&AC system shut off, as practical, for several hours.


Future Cleaning of Carpeting or Rugs: Air Out the Room During and After Vacuuming

* The next several times you vacuum the rug or carpet, shut off the H&AC system if you have one, close the doors to other rooms, and open a window or door to the outside before vacuuming. Change the vacuum bag after each use in this area.
* After vacuuming is completed, keep the H&AC system shut off and the window or door to the outside open, as practical, for several hours.

http://www.epa.gov/cfl/cflcleanup-detailed.html

.

Recommendations

0 members have recommended this reply (displayed in chronological order):

Also, it's hard or impossible to find CFL bulbs for certain socket sizes LiberalEsto Dec 2013 #1
My only lamp won't fit a CFL, and they don't work in my oven light. arcane1 Dec 2013 #5
appliance lamps (oven) exempt Duckhunter935 Dec 2013 #12
That's good news. arcane1 Dec 2013 #13
PLEASE Sassysdad Dec 2013 #16
I didn't mean IN the oven, I meant the light above the stove-top arcane1 Dec 2013 #17
And CFLs have mercury in them. They can acidentally be broken, and djean111 Dec 2013 #2
Yes, that's my biggest concern with them. A means to dispose of them should be established. Fla Dem Dec 2013 #25
Most Hardware stores have on site recycling K lib Dec 2013 #36
I'll agree that CFLs don't last as long as advertised gollygee Dec 2013 #3
And as they get older MurrayDelph Dec 2013 #15
How they get the advertised life is very simple jmowreader Dec 2013 #40
I bought two Mnpaul Dec 2013 #65
Cleanup instructions if you break a CFL bulb (careful with that mercury vapor): Nye Bevan Dec 2013 #4
Makes you want to run right out and buy some! djean111 Dec 2013 #6
Your home will be dark LordGlenconner Dec 2013 #24
Oh, I have bulbs stashed away. And LEDs are getting cheaper. djean111 Dec 2013 #26
I'm not concerned LordGlenconner Dec 2013 #43
Oh hell AndreaCG Dec 2013 #81
Thanks for your concern. I've used exclusively CFL bulbs for nearly a decade and never had one break morningfog Dec 2013 #88
You should tell the EPA that. Nye Bevan Dec 2013 #89
Not saying the instructions from the EPA aren't necessary. morningfog Dec 2013 #90
good info on exemptions Duckhunter935 Dec 2013 #7
Thanks! In_The_Wind Dec 2013 #87
the law allows most non-standard incandescents to stay on the market... JCMach1 Dec 2013 #8
I love 3 way bulbs. RGinNJ Dec 2013 #9
exempt nt Duckhunter935 Dec 2013 #11
I just use a high output LED with a light dimmer in my lamp LiberalArkie Dec 2013 #80
replaced all of mine with LED Duckhunter935 Dec 2013 #10
Do you recommend one brand/model over another?..nt Jesus Malverde Dec 2013 #30
I have had good luck with Phillips. rufus dog Dec 2013 #44
why not feit? Niceguy1 Dec 2013 #54
The bad CFLs were Feit rufus dog Dec 2013 #70
its not feit its Niceguy1 Dec 2013 #72
I keep hawking the Cree brand at Home Depot DirkGently Dec 2013 #51
Just bought one of those for $5.... Wounded Bear Dec 2013 #73
I have an LED bulb that has been going strong for over a year--GREAT light. MADem Dec 2013 #53
There are five fixtures in our house that require incandescent bulbs. Egalitarian Thug Dec 2013 #14
bet those bulbs are exempt Duckhunter935 Dec 2013 #18
I'd prefer a light that is both low-power and dimmable(?). Egalitarian Thug Dec 2013 #21
I recall reading somewhere that enlightenment Dec 2013 #32
been dimmable for years Duckhunter935 Dec 2013 #34
That was the name I was trying to think of - Cree. enlightenment Dec 2013 #37
We tried the CFL's in the Kitchen (standard socket size) and when the power wasn't on all the way, Egalitarian Thug Dec 2013 #35
If you want a dim bulb, Jenoch Dec 2013 #71
Also, incandescent light bulbs don't hurt my eyes like CFLs. Vashta Nerada Dec 2013 #19
Thta is one of my main 2naSalit Dec 2013 #52
I have an astigmatism also. Vashta Nerada Dec 2013 #61
I have a LOT of CFL in my house. PowerToThePeople Dec 2013 #20
I thnk they burn out quickly too. femmocrat Dec 2013 #66
Color of the light - that is why I prefere incandescent bulbs. liberal N proud Dec 2013 #22
I don't know the cause and won't profess to... Shandris Dec 2013 #23
You can buy a 4 pack Control-Z Dec 2013 #50
Really? Shandris Dec 2013 #55
kind of long but it is the math Duckhunter935 Dec 2013 #27
Firstly not all incandescents are going. Quartz halogen incandescents will still be available intaglio Dec 2013 #28
heat and light quality alc Dec 2013 #29
I was just down at my local Target, they have a bunch of incandecents on clearance. Packerowner740 Dec 2013 #31
I just returned from Wal-Mart (I know, I know!) and there wasn't... Shandris Dec 2013 #45
CFLs were poor replacements. LEDs are better IMHO. Gormy Cuss Dec 2013 #33
With CFLs or LEDs, your food never gets properly cooked... Silent3 Dec 2013 #38
The cats like them Retrograde Dec 2013 #39
Freeper Libertarians. Rod Beauvex Dec 2013 #41
I know it's just me but I seem to have trouble with depth perception with LEDs. CFLs are better. Gidney N Cloyd Dec 2013 #42
Message auto-removed Name removed Dec 2013 #46
The LED bulbs do not last any longer than the incandescent bulbs. RebelOne Dec 2013 #47
I think you've been buying the wrong ones, then. Warren DeMontague Dec 2013 #59
I have a 40 watt LED that hasn't been turned off in two years. NutmegYankee Dec 2013 #75
In some applications, CFLs flat out don't work. 99Forever Dec 2013 #48
Your wish has been granted. Sorta. DirkGently Dec 2013 #56
I keep hoping this company would get their product out Paulie Dec 2013 #49
Looks like an interesting technology. DirkGently Dec 2013 #60
Just put in two LEDs PasadenaTrudy Dec 2013 #57
I have those, and keep yakking about how great they are. DirkGently Dec 2013 #67
That's my plan too T PasadenaTrudy Dec 2013 #85
CFLs don't produce the same kind of light, take time to warm up, usually can't be dimmed, etc. Warren DeMontague Dec 2013 #58
I kind of wish I hadn't bought CFLS. DirkGently Dec 2013 #62
Yeah, I keep a box in the garage with old Ni-Cd batteries. But I think places like Home Depot will Warren DeMontague Dec 2013 #64
I have that garage box. Motor oil, paint thinner, DirkGently Dec 2013 #68
Totally. I'm probably at about 50% on LEDs now Warren DeMontague Dec 2013 #86
It's a bald-faced attempt of Obama Turbineguy Dec 2013 #63
On CFL longevity ConcernedCanuk Dec 2013 #69
They still make them. There are incandescent A19 bulbs that are 28% more efficient on the market. NutmegYankee Dec 2013 #74
Message auto-removed Name removed Dec 2013 #76
This message was self-deleted by its author Duckhunter935 Dec 2013 #78
Because freedom! Iggo Dec 2013 #77
LEDs are great Matariki Dec 2013 #79
Just returned from Lowes in LA Zorro Dec 2013 #82
Thats great news. Jesus Malverde Dec 2013 #83
i like the led bulbs but i cannot afford to buy them. madrchsod Dec 2013 #84
Latest Discussions»General Discussion»Why people still use inef...»Reply #4